Cañon City High School Electric Vehicle Projects - 1951 John Deer Tractor and 1978 Fiat X19

Designed by: Frank J. Nosal

Project Car for EV Conversion

A 1978 Fiat Bertone has been selected for the electrical vehicle project car. Electrical parts for the vehicle will be installed in the vehicle once the gasoline components are removed. The car weighs 2,280 pounds.

Friday, December 2, 2011

Final Wiring Inspection Before System is Powered On

Referencing the wiring diagram students check the wiring of the components prior to powering on the vehicle.

Posted by Unknown at 9:42 AM

No comments:

Post a Comment

Newer Post Older Post Home

Fiat Ready for Seminar

Final Wiring Inspection Before System is Powered On

Making Final Connections

Student works with project mentor to build the final cables needed for the wiring system.

Parts Removed

This photo shows numerous parts that were moved inorder to convert the car from a gasoline engine to an electric vehicle.

Disassembly of Project Car

Student Begin Discussing Disassembly of Project Car to Determine Where to Start with the Project.

EV Project Car

1978 Fiat Bertone X19

Students Working on Project

Mentor Larry Guy and high school students

Starting Another Phase

The tractor project is into another phase. Students and Mentor Larry Guy have dis-assembled the electrical components of the tractor to build a board where the parts are mounted. A working model of the electrical will be constructed on the board. Once completed, the components will be re-installed into the tractor.

Tractor is Running!

The tractor finally came together this summer. The electrical parts (controller, ignition switch, resistor, contactor, batteries) we connected. The tractor is up and running.

Electric Vehicle Project

1951 John Deer Garden Tractor

Tractor Project is Coming Together!

Work on the tractor project has continued and the final steps of getting the project completed are coming together. The motor will be mounted next and connected to the controller. Some research is needed to figure out the components needed for the electrical system.

Electric Tractor

Tractor Charging on Solar Panel

Electrical Components

The Electrical Components of the Project

Electrical Wiring Diagram

By Steve Clunn

Battery Boxes

Students mount the battery boxes and throttle controller. The next steps is to mount the battteries and connect the batteries to the motor.

Motor Mount is Ready to Use

The motor mount for the 24 volt dc motor is ready to use. The motor mount was manufactured by Canon City HS machine shop students.

What does the controller do?

This drawing shows the function of the controller in an electric vehicle compared to the carburator in a gasoline engine.

Alltrax Controller

The controller for the tractor projector was donatted by the AllTrax Company a leading supplier for electric vehicle components.

Mounting of the Motor

Motor mounting - 4 hp DC motor

A drawing for the motor bracket was drawn up by Werner Windbergs and given to the school's machine shop for students to fabricate the motor mount. The two piece mount will be bolted to the frame of the tractor to secure the motor to the tractor. A v belt will connect the motor to the drive pulley.

Motor Selected for EV Project

A 4 hp DC motor found on eBay has been selected and ordered for the EV garden tractor project.

Here are the specifications for the motor:

- 4 HP 24 VDC ELECTRIC MOTOR

- Serial Wound

- 45 AMPS NO LOAD

- 140 AMPS FULL LOAD

- 8000 RPM FULL LOAD

- 32 INCH POUND OF TORQUE

- ¾” DIAM. X 1 ¾” KEYWAY SHAFT

- DIMENSION 4” DIAM. X 7 ¾”

EV Project - Photos & Stories

Home
Tractor is Transported to High School

EV Links

Press Relese: Daily Record (June 2010)
Who Killed the EV

Tractor is turned over for wasy access to the underside.

1951 John Deer Tractor

Picture Gallery

Resources

Electric Vehicle Conversion

Picture Window theme. Powered by Blogger.